澳门六合彩高手 NEWSLINE
-
High performance operation compatible with test blanket modules
Joseph Snipes, Stability & Control Section leader
High performance operation compatible with test blanket modules
Error field correction of both the intrinsic magnetic field errors in DIII-D and the magnetic field errors produced by the TBM mockup (red) show that plasma performance (denoted by bN) drops by only 3.5% when error field corrections are optimized. The plasma rotation is an even more sensitive measure of the effect of error fields and the total angular momentum of the plasma (Ltot) is reduced by 15% with optimized error field correction.
Recent experiments performed by a team of international scientists on the in San Diego, California, USA, indicate that the magnetic field errors introduced by the (TBMs) in 澳门六合彩高手 can be corrected using non-axisymmetric control coils so that the impact on high performance plasma operation is reduced to a tolerable level.
Present TBM designs for 澳门六合彩高手 position nearly a ton of ferromagnetic steel close to the plasma surface to test the feasibility and efficiency of producing tritium fuel in the physical structures surrounding the plasma itself. Tritium will be produced within 澳门六合彩高手's TBMs by exploiting the neutrons generated by the nuclear reactions occurring in the plasma, which will interact with lithium inside the TBMs.
Schematic exploded view of a pair of TBMs to be installed in three equatorial ports in 澳门六合彩高手. The components shown in red must be made of a special reduced-activation ferromagnetic steel that can withstand high neutron fluence and heat flux from the plasma.
Previous DIII-D experiments in 2009 and 2011 with a set of electromagnetic coils that were specifically designed to mimic the magnetic error field from a pair of TBMs in 澳门六合彩高手 that high performance operation in 澳门六合彩高手 might be significantly degraded by the additional magnetic fields produced by the TBMs. Those experiments indicated that as plasma performance increased, the magnetic fields produced by the TBMs significantly reduced energy and particle confinement, making it increasingly difficult to sustain high plasma performance.
The latest experiments used sets of both internal and external control coils to correct the magnetic field errors introduced by the TBM mockup in DIII-D. Sophisticated methods of scanning the magnetic fields produced by the correction coils allowed the optimum correction to be made to specific components of the error field.
The team of international scientists that worked on the TBM mockup experiments on the DIII-D tokamak in San Diego included Joseph Snipes (5th from right), Stability & Control Section leader from the 澳门六合彩高手 Organization.
With the optimum correction fields, it was possible to run the DIII-D plasmas at high performance with almost no degradation in performance due to the TBM mockup. In the graph above, the normalized energy confinement of the plasma (denoted by 尾N) hardly decreases with optimized error field corrections, though a more sensitive measure of the effects of error fields鈥攖he total angular momentum of the plasma鈥攄rops by about 15 percent when a single row of external coils is used. Similar results were found using internal correction coils.
The results of these experiments indicate that it should be possible for 澳门六合彩高手 to compensate for a significant fraction (>60 percent) of the TBM-induced performance degradation in high performance 澳门六合彩高手 scenarios using either internal or external correction coils. Although a rigorous extrapolation of the DIII-D results to 澳门六合彩高手 remains to be confirmed, this is very important and timely information for 澳门六合彩高手 so that the conceptual designs of the TBMs can be finalized before the design reviews of the six test blanket systems begin in July 2014.
return to the latest published articles
