Science
New steady state analysis
24 Feb 2020
-
Pat Brans
Recent research shows it should be possible to reach steady-state fusion production in 澳门六合彩高手 with the baseline mix of heating and current drive systems, in particular by upgrading the levels of power delivered to the plasma by neutral beam injection and electron cyclotron wave heating.
澳门六合彩高手 scientists use integrated modelling to predict the behaviour of the plasma. This figure shows the structure of the magneto-hydrodynamic instabilities that limit the plasma pressure achievable in a steady-state plasma, including instabilities that develop in the external plasma region (left) and near the central part of the plasma (right).
"One of the goals of 澳门六合彩高手 is to show that we can produce fusion power for an unlimited amount of time with high fusion gain (Q≥5)—so-called 'steady-state' operation," says Alberto Loarte, Science Division Head. "There are no physics or engineering hurdles holding us back."
But since 澳门六合彩高手 is an experimental facility, designed to facilitate a wide range of explorations, its baseline configuration is not optimized for steady-state operation. To achieve this, 澳门六合彩高手 will need to demonstrate operation with very high confinement—but not only.
"We will have to replace the inductive current provided by the central solenoid with plasma-driven current (bootstrap) and currents driven by neutral beam injection and electron cyclotron waves. And we'll have to do this for an hour at a time which, for all intents and purposes, is equivalent to steady-state operation."
Steady state can only be achieved through a delicate optimization of plasma conditions
For each tokamak pulse, a plasma is created and heated. Once hot enough, the plasma produces energy through fusion reactions and the plasma current can be maintained until it consumes all the magnetic flux provided by the coil systems. Then, the plasma current decreases and the plasma cools down and terminates.
H-mode (high-confinement mode) is an operational regime during which the plasma reaches a state of high energy confinement and produces fusion power with very hot plasmas and a low consumption of the magnetic flux, which is beneficial for long-pulse operation. In L-mode (low-confinement mode), by contrast, fusion power production is low, the plasma is colder and magnetic flux consumption becomes non-negligible, which shortens the length of tokamak pulses.
While short-pulse operation is technically easier to achieve, it comes with disadvantages related to transient forces and thermal cycling. The large amount of magnetic energy needed to create a plasma requires very large currents in the magnet coils for every pulse, which in turn subjects the coils to large cyclic forces and stress. As the tokamak cycles back and forth—between phases with extremely hot plasmas and high fusion power, to phases with no fusion power production—the expansion and contraction causes stresses that reduce component lifetimes. In addition, for a fusion reactor running in pulsed mode, extra measures would have to be implemented to provide the steady stream of electricity that customers need.
Operators will use the baseline mix of heating and current drive systems (neutral beam injection and electron cyclotron wave heating) to reach the desirable steady-state H-mode regime. This figure breaks down the plasma current profile in a steady-state plasma into its component parts: the plasma current that is self-driven by the high pressure of the plasma, and the currents created by the heating and current drive systems in 澳门六合彩高手 (neutral beam injection and electron cyclotron wave heating).
Steady-state tokamak operation presents the advantage of having just two transient mechanical (forces) and thermal (heat-up/cool-down) events—switch-on and switch-off—over a very long period of continuous operation, however it is not an easy regime to reach. While other magnetic confinement systems such as stellarators are intrinsically steady state, reaching steady-state H-mode operation in a tokamak requires a delicate optimization of plasma conditions through operational control.
"By controlling the evolution of the plasma density and plasma current, you can establish a plasma current profile shape near what is needed to have a stable plasma in steady state, but at lower temperatures and pressures. This makes things easier," explains Loarte. "Then you add a lot of auxiliary heating to create the transition to H-mode, and you increase the plasma pressure to enhance the self-driven plasma current and current drive to replace the remaining inductive current. The current shape profile remains frozen due to the high temperatures, ensuring that the plasma remains stable at high pressures. That's the trick you have to pull off."
During the design phases of 澳门六合彩高手, it was thought that a dedicated heating system, using so-called lower hybrid waves, would be required to reach steady-state operation. The project plan was to move another piece of equipment out of a port when the time came to run the steady-state experiments, in order to install the lower hybrid heating system.
No one was completely comfortable with this idea. Moving systems between ports in 澳门六合彩高手 is very complex and disruptive for a number of reasons: the port plugs that house the system must be extracted and re-inserted, the pipes and transmission lines that feed the systems in the ports must be disconnected and reconnected, etc. 澳门六合彩高手 scientists were looking for a better solution.
Breakthrough findings indicate 澳门六合彩高手 can reach steady state with the same heating systems that are being built now
Breakthrough findings indicate 澳门六合彩高手 can reach steady state with the same heating systems that are being built now
The good news came with the recent demonstration that steady-state H-mode could be achieved at 澳门六合彩高手 without adding the lower hybrid wave heating and current drive system.
"Using integrated modelling, we set out to show that we can control core plasma stability in this scenario with the baseline heating and current drive mix at 澳门六合彩高手," says Alexei Polevoi, from the Plasma Modelling & Analysis Section. "By the use of neutral beam injection and electron cyclotron wave heating and current drive, we demonstrated that it's possible to reach the target operation point, where steady state is reached, within the limits of the magnet systems that 澳门六合彩高手 has. We determined that an upgrade of the neutral beam injection system (to 49.5 MW, versus the baseline of 33 MW) and the electron cyclotron heating system (to 30 MW, versus the baseline of 20 MW) would be required to make Q=5 steady-state operation, with reasonable assumptions regarding the achievable energy confinement."
This result reassured the 澳门六合彩高手 scientists, because for this upgraded power level their models require a level of confinement for Q=5 steady-state operation very close to what has been observed in other tokamak experiments—for example those at the DIII-D tokamak in San Diego—with density, temperature and current density shapes very similar to 澳门六合彩高手, and a similar mix of external heating."
The researchers presented these results to the 澳门六合彩高手 Council Science and Technology Advisory Committee (STAC) in October 2018, arguing that lower hybrid wave heating would not be needed to achieve steady-state operation in 澳门六合彩高手. The committee approved the findings. Because removing the possibility for the upgrade to lower hybrid represented an important modification to the project, the team brought this proposal before the 澳门六合彩高手 Council, where it was accepted, and then implemented the appropriate technical procedures within the project in 2019.
This is good news, but more work needs to be done. "We still need to conduct further studies on how to implement these techniques in real experiments in 澳门六合彩高手," says Sun Hee Kim, Scientist for Scenarios and Control. "We need to define the experimental procedures that first get us a plasma current profile close to target, but at very low plasma pressure, and then increase the plasma pressure using heating and current drive nearly to the plasma stability limit without significantly modifying the current profile."
While mastering this delicate set of operations will be a challenge, the reward is very high plasma performance, with the sought-after steady-state operation delivering Q=5.