°ÄÃÅÁùºÏ²Ê¸ßÊÖ

In the industrial outskirts of Padua, Italy, about 40 kilometres west of Venice, the long white buildings of the PRIMA Neutral Beam Test Facility are now ready to receive equipment, after a little over a year of construction activity.   At PRIMA, the components of °ÄÃÅÁùºÏ²Ê¸ßÊÖ's most powerful heating system—neutral beam injection—will be tested in advance of °ÄÃÅÁùºÏ²Ê¸ßÊÖ operation.  Europe, Japan and India are contributing all components according to the specifications of Procurement Arrangements signed with the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization; Italy is building the facility as a voluntary contribution to the neutral beam development program. The PRIMA facility is hosted by Consorzio RFX, an Italian research laboratory for plasma physics and controlled nuclear fusion.   Two test beds at PRIMA will help resolve challenging physics and technology issues and validate concepts before the neutral beam system is built at °ÄÃÅÁùºÏ²Ê¸ßÊÖ. The first, SPIDER, will operate an °ÄÃÅÁùºÏ²Ê¸ßÊÖ-scale radio-frequency negative ion source. After approximately two years from the start of SPIDER, a second facility, MITICA, will enter operation to test the 1:1-scale neutral beam injector at full acceleration voltage and power.   In Padua, Italy, the PRIMA complex will house the SPIDER and MITICA experiments, as well as facilities for power supplies, cryogenics, and cooling. Europe, Japan and India—which all have significant experience with neutral beam technology—are contributing the components based on specifications provided by the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization. Fabrication is now underway for all SPIDER components. Factory acceptance tests on the vacuum vessel are planned mid-year in Europe; delivery of the 100 kV power supply and beam dump (part of the Indian contribution) is expected at the end of year according to plan. For MITICA, all of the build-to-print mechanical components have reached the final design stage and were presented for review in January 2014. Following chit resolution, procurement of these components will be launched by the European Domestic Agency.   "This ambitious development program for neutral beam heating will allow us to acquire valuable information about neutral beam manufacturability and operation before we are called on to install and operate two heating neutral beam (HNB) injectors in °ÄÃÅÁùºÏ²Ê¸ßÊÖ, as well as the diagnostics neutral beam (DNB)," says Deirdre Boilson, head of the Heating & Current Drive Division at °ÄÃÅÁùºÏ²Ê¸ßÊÖ. "Already, as manufacturing for SPIDER is underway, we are learning important technical lessons that will directly serve the manufacturability of the beam sources of the DNB and HNBs."   All of the components for the PRIMA test beds belong to the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization. Once they've been delivered to the site in Padua and have passed acceptance tests, ownership responsibility will be transferred to the European Domestic Agency for the duration of SPIDER and MITICA operation.   "Neutral beam technology is key for °ÄÃÅÁùºÏ²Ê¸ßÊÖ, but also for the next-stage fusion device," says Deirdre. "We're looking forward to PRIMA's experimental results, based on which we'll be able to move forward with full confidence to install and operate the neutral beam injectors on °ÄÃÅÁùºÏ²Ê¸ßÊÖ."   Studying negative ion beam technology at ELISE At the Max Planck Institute for Plasma Science (IPP) in Garching, Germany, experiments underway on a half-size radio-frequency-driven negative ion source, ELISE, have made important contributions to the design of SPIDER and MITICA and to their future operation. In addition to this important research input, the R&D program funded by the European Domestic Agency is also making another important contribution to the neutral beam development program: offering important training opportunities to the scientists and engineers from Consorzio RFX.     Watch a recent video on ELISE from the European Domestic Agency here.

Registration is open for the Korean °ÄÃÅÁùºÏ²Ê¸ßÊÖ Business Forum (IBF Korea/14), which will take place in Seoul from 1 July 2014, through 4 July 2014. At IBF Korea/14, company representatives will have access to the latest updated information on °ÄÃÅÁùºÏ²Ê¸ßÊÖ procurement procedures and forthcoming calls for tenders (2014-2015), with a special focus on the procurement status of the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Domestic Agencies, their main suppliers, and potential opportunities for partnership, subcontracting or local support. One-to-one meetings between industrial participants will be organized to facilitate the creation of business relations between the industries involved with °ÄÃÅÁùºÏ²Ê¸ßÊÖ and fusion. Highlights of the four-day event include presentations by the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization, the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Domestic Agencies, and principle industrial suppliers; tours of the KSTAR tokamak and the converter firm Dawonsys Co., Ltd; and social events where participants can interact with the different actors of the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Project. IBF Korea/14—which is the first Asian °ÄÃÅÁùºÏ²Ê¸ßÊÖ Business Forum held in Korea—is organized by the Korean Domestic Agency with the participation and support of the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization and the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Domestic Agencies including Fusion for Energy, the European Domestic Agency. Ninety-three representatives from 53 different companies have already registered; please join them by registering for the conference and the one-to-one meetings. The IBF Korea/14 organizers hope you will take this opportunity to make business contacts with European or Asian companies in industrial areas related to the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Project and, more largely, your core business. 

After years of calculation, planning, component production and installation, the Wendelstein 7-X project entered a new phase in May 2014: at the Max Planck Institute for Plasma Physics in Greifswald, Germany, preparations started for operation of the world's largest fusion device of the stellarator type.   Wendelstein 7-X aims to show that, like tokamaks, stellarators are also a suitable concept for power plants. The complex structure of its magnetic field—the result of sophisticated optimization calculations—will be produced by a system of 50 unconventionally shaped superconducting magnet coils, the veritable technical core of the device.   Able to operate through discharges lasting half an hour, they will contribute to demonstrating the essential advantage of stellarators: continuous operation.   Companies from all around Europe produced the components for Wendelstein 7-X and numerous research facilities were involved in construction of the device.   In the audience (from left to right, front row): Prof. A. Smith, PPPL, USA; Dr. Richard Hawryluk, PPPL, USA; Prof. Osamu Motojima, Director-General, °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization; Erwin Sellering, Prime Minister of Mecklenburg-Western Pomerania; Prof. Dr. Peter Gruss, President of the Max Planck Society; Prof. Dr. Sibylle Günter, Scientific Director of IPP; Prof. Dr. Johanna Wanka, Federal Minister of Education and Research. Also present (not pictured), the former Technical Director of Wendelstein 7-X, Rem Haange, currently head of the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Project Department. At the beginning of May the cryostat was closed and the first pumps started up. An inauguration ceremony was held on 20 May in the presence of a large audience of national and international experts and guests of honour, including °ÄÃÅÁùºÏ²Ê¸ßÊÖ Director-General Osamu Motojima, EU Energy Commissioner Günther Oettinger, and Johanna Wanka, German Federal Minister of Education and Research.   If all goes well, Wendelstein 7-X will produce its first plasma in about a year. "We all know the trend of global development, the hunger for energy of emerging economies and emerging countries, the finite nature of natural resources, the need to curtail climate change and to live the principle of sustainability," said Professor Johanna Wanka, Federal Minister for Education and Research, in her keynote speech. "So when we talk about energy, we need research that keeps all options open. And one of these options is nuclear fusion. Wendelstein 7-X is an important step forward allowing us to better evaluate the "fusion option."

Pink is a colour that is not often used in the world of heavy industry, but special requests sometimes call for special measures. And so the Swiss company Kompaflex chose pink for its successful test campaign of °ÄÃÅÁùºÏ²Ê¸ßÊÖ's mighty bellows.   Eighty-five large, rectangular bellows will be used between the °ÄÃÅÁùºÏ²Ê¸ßÊÖ vacuum vessel, the cryostat and the walls of the Tokamak Building themselves to isolate the ultra-high vacuum inside the cryostat from the building port cell environment, and to compensate relative movement that can occur during different operational regimes and events (baking, cooldown).   The bellows will be made of multiple thin layers of 304/304L or Inconel steel that can absorb movements between the different structures up to a level of about 50 millimetres.   Large bellows will be used between the cryostat and the vacuum vessel—and between the cryostat and the building—to allow for thermal contraction and expansion in the structures. In order to confirm design readiness and to determine the feasibility of bellow manufacturing, an engineering contract was awarded to the Swiss expansion joint specialist Kompaflex AG based in Steinebrunn, near the shores of Lake Constance.   On 15 May, a full scale prototype bellow (shown as blue in the graphic at left), measuring 3.6 x 3.2 metres, was tested in the presence of representatives from the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization and the Indian Domestic Agency—the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Member that will have the responsibility of finally procuring the components.   The large weights of steel and concrete in the picture (painted pink) give an idea of the resulting force from the combined spring rates due to different relative movements. These spring rates were determined by design calculations, FEM analysis (used commonly in engineering) and 1:1 testing, and confirmed during the recent test campaign. Further tests on the prototype will follow to measure its stability under vacuum and to test helium leakage.

The eleventh meeting of the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Council Test Blanket Module (TBM) Program Committee took place on 21-23 of May in the Council Chamber of °ÄÃÅÁùºÏ²Ê¸ßÊÖ Headquarters.   The TBM Program Committee meets twice a year to review the implementation of the TBM program, including the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Members' Test Blanket Systems and the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization's TBM integration activities. Typical standing items at each meeting include the status of the TBM-related activities within the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization, TBM design and R&D progress within the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Members, and the status of corresponding milestones.   During the eleventh meeting, good progress was reported by the TBM Leaders, who hold the responsibility for specific Test Blanket Systems. Design development is progressing in view of upcoming conceptual design reviews for each system, and design activities under °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization responsibility—for TBM port cell components and specific maintenance tools and equipment—are advancing.   Twice a year, the TBM Program Committee reviews TBM-related activities within the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization, TBM design and R&D progress within the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Members, and the status of corresponding milestones. The first component delivery associated with the TBM Program is expected in 2017 and will concern Test Blanket System connection pipes, which will connect the components located in the TBM equatorial port cell to the components located in other rooms of the Tokamak Complex via the corresponding shaft and/or corridor. With the conceptual design review planned for September 2014, the eleventh TBM Program Committee assessed the readiness of the design.   The Committee also took note of the status of the activities of the Test Blanket Program Working Group on Radwaste Management. This working group is charged with the elaboration of a potential strategy for the management of TBS radwaste and for the shipping of irradiated TBMs to Members' facilities for post-irradiation examinations. The TBM Program Committee has assessed the data on radwaste furnished by the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Members and on the radwaste management proposals of Agence Iter France. One of the major issues identified to date is the need for an assessment of the amount of tritium remaining in the waste and of the corresponding outgassing.   On 23 May, the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization and the Korean Domestic Agency signed the second TBM Arrangement of the program for the design, fabrication, transport and delivery of a helium-cooled ceramic reflector Test Blanket System. Four other TBMAs are expected to be signed before the end of the year. In fact the year 2014, with the planned conceptual design reviews of five Test Blanket Systems out of six, represents the beginning of a new phase for the TBM Program, which is passing from pure scientific research to nuclear engineering and realization. This aspect was stressed by the TBM Program Committee as it focused the discussion on the preparation of documentation for the various conceptual design reviews.   Reaching this phase has been made possible by the conclusion of TBM Arrangements (TBMA), which express the commitment of both °ÄÃÅÁùºÏ²Ê¸ßÊÖ Members and the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization to the realization of the TBM Program. During this eleventh Program Committee meeting, a second TBMA was signed between °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization and the Korean Domestic Agency for the design, fabrication, transport and delivery of a helium-cooled ceramic reflector Test Blanket System to the °ÄÃÅÁùºÏ²Ê¸ßÊÖ site by 2021. The remaining four TBMAs are expected to be signed before the end of the year.   The outcome of the eleventh TBM Program Committee will reported to the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Council in June.

?°ÄÃÅÁùºÏ²Ê¸ßÊÖ is the most complex experiment ever attempted on this planet. Its aim, to demonstrate that nuclear fusion, the power of the Sun, can give us pollution free energy that we can use for millions of years. But at the moment, it's still largely a vast building site in the Haut Provence of southern France ...Roland Pease has been to Cadarache to see how work is progressing, and to hear of the hopes of the scientists who have dedicated their working lives to the dream.Listen to the 30-minute documentary from the BBC World Service program Discovery here. 

At Cadarache (south of France), the Institute for Magnetic Fusion Research (CEA/DSM/IRFM) is modifying the Tore Supra plasma facility to become a test platform open to all °ÄÃÅÁùºÏ²Ê¸ßÊÖ partners : the WEST project (acronym derived from W Environment in Steady-state Tokamak, where W is the chemical symbol for tungsten). The goal is to equip the tokamak with an actively cooled tungsten divertor, benefitting from its unique long pulse capabilities, its high level of additional power and the unique experience of operation with actively cooled components. Read the latest news from the WEST project in the attached document.

?On 21 May, directly after the regular class schedule, students, graduates and young scientists of the Moscow Institute of Physics and Technology had the chance to meet representatives of the Russian Domestic Agency. The exchange was organized as part of °ÄÃÅÁùºÏ²Ê¸ßÊÖ Day to inform Russia's future physicists about the international collaboration for fusion, progress in its implementation, and the ongoing activities in Russia carried out within its framework. The head of the Russian Domestic Agency, Anatoly Krasilnikov, stressed that attraction of young scientists for fusion is based not only on the potential of the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Project, but also the national development program for the construction of a domestic fusion facility. "This is the decades-long project and we need highly qualified personnel to work for it!" °ÄÃÅÁùºÏ²Ê¸ßÊÖ Russia is intensifying its activities to inform and attract the best minds. During °ÄÃÅÁùºÏ²Ê¸ßÊÖ Day, students heard about development work on a number of diagnostic systems for °ÄÃÅÁùºÏ²Ê¸ßÊÖ (reflectometry, neutron diagnostics, optical systems) underway in Russian institutes where, the speakers stressed, employments opportunities exist.