澳门六合彩高手 NEWSLINE
-
Cryopumps
Time to hand over to industry
澳门六合彩高手 Vacuum Section
Cryopumps | Time to hand over to industry
After more than 12 years of development, the 澳门六合彩高手 cryopump is ready for industrial procurement. The Procurement Arrangement for the eight production torus and cryostat cryopumps was signed on 16 November 2018 between the 澳门六合彩高手 Organization and the European Domestic Agency, Fusion for Energy.
The signature of the Torus and Cryostat Cryopump Procurement Arrangement opens the way to the industrial procurement of the equipment. The European Domestic Agency will procure the pumps and auxiliaries; the 澳门六合彩高手 Organization will be charged with installation, testing and commissioning. From left to right: Johannes Schwemmer, F4E Director; Robert Pearce, 澳门六合彩高手 Vacuum Section leader; 澳门六合彩高手 Director-General Bernard Bigot; and Matthias Dremel, Gilles Wolfers and Roberto Salemme from the 澳门六合彩高手 vacuum team.
As one of 澳门六合彩高手's most complex components, and as a build-to-print procurement package, the Procurement Arrangement contains more than 500 drawings and approximately 400 pages of detailed manufacturing specifications.
澳门六合彩高手 will rely on six torus cryopumps to maintain ultra-high vacuum inside the 澳门六合彩高手 vacuum vessel during operation and to create low density鈥攁bout one million times lower than the density of air. Two cryostat cryopumps will maintain the low pressure required for the operation of the superconducting magnets.
Following the successful manufacturing of the first pre-production cryopump, a final design review of the equipment took place in March 2018 with experts from the 澳门六合彩高手 Organization and the European Domestic Agency and external specialists.
According to Robert Pearce, 澳门六合彩高手 Vacuum Section leader, the design of the 澳门六合彩高手 cryopumps design has been an engineering challenge due to their operation at both cryogenic temperatures (<4.5 K) and high temperatures (up to 500 K); the precision needed on the moving parts on the
world's largest all-metal high vacuum valve; and their core importance to the reliable operation of 澳门六合彩高手. "Not only did the pumps have to be designed, but the manufacturing of many of the parts had to be tested. The manufacturing of the pre-production cryopump (delivered to the 澳门六合彩高手 site in
August 2017) paved the way for a successful final design review in March 2018."
This milestone has been achieved due to a strong collaboration between the 澳门六合彩高手 Organization and the European Domestic Agency, and has involved many actors including European industry and associations.
"Signing this Procurement Arrangement allows the call for tender to be released to manufacture the eight cryopumps," explain the technical officers for the procurement, 澳门六合彩高手's Matthias Dremel and Fusion for Energy's Francina Canadell. "澳门六合彩高手 will continue its collaboration throughout the manufacturing phase and this shall ensure delivery of the pumps to the 澳门六合彩高手 site in 2023 for installation in the divertor ports of the vacuum vessel and cryostat. These components are critical to achieving the vacuum necessary to initiate First Plasma in 2025."
The back of the pre-production cryopump, showing all the connection flanges to the pump and the valve actuator in the middle. Challenging to engineer, this high-tech realization is the result of more than 12 years of development.
Please also refer to a full report on the website of the European Domestic Agency (F4E) here. The upcoming F4E call for tender will be published on this page.
return to the latest published articles
