Cryopumps
Time to hand over to industry
26 Nov 2018
-
°ÄÃÅÁùºÏ²Ê¸ßÊÖ Vacuum Section
After more than 12 years of development, the °ÄÃÅÁùºÏ²Ê¸ßÊÖ cryopump is ready for industrial procurement. The Procurement Arrangement for the eight production torus and cryostat cryopumps was signed on 16 November 2018 between the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization and the European Domestic Agency, Fusion for Energy.
As one of °ÄÃÅÁùºÏ²Ê¸ßÊÖ's most complex components, and as a build-to-print procurement package, the Procurement Arrangement contains more than 500 drawings and approximately 400 pages of detailed manufacturing specifications.
°ÄÃÅÁùºÏ²Ê¸ßÊÖ will rely on six torus cryopumps to maintain ultra-high vacuum inside the °ÄÃÅÁùºÏ²Ê¸ßÊÖ vacuum vessel during operation and to create low density—about one million times lower than the density of air. Two cryostat cryopumps will maintain the low pressure required for the operation of the superconducting magnets.
According to Robert Pearce, °ÄÃÅÁùºÏ²Ê¸ßÊÖ Vacuum Section leader, the design of the °ÄÃÅÁùºÏ²Ê¸ßÊÖ cryopumps design has been an engineering challenge due to their operation at both cryogenic temperatures (<4.5 K) and high temperatures (up to 500 K); the precision needed on the moving parts on the world's largest all-metal high vacuum valve; and their core importance to the reliable operation of °ÄÃÅÁùºÏ²Ê¸ßÊÖ. "Not only did the pumps have to be designed, but the manufacturing of many of the parts had to be tested. The manufacturing of the pre-production cryopump (delivered to the °ÄÃÅÁùºÏ²Ê¸ßÊÖ site in August 2017) paved the way for a successful final design review in March 2018."
This milestone has been achieved due to a strong collaboration between the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization and the European Domestic Agency, and has involved many actors including European industry and associations.
"Signing this Procurement Arrangement allows the call for tender to be released to manufacture the eight cryopumps," explain the technical officers for the procurement, °ÄÃÅÁùºÏ²Ê¸ßÊÖ's Matthias Dremel and Fusion for Energy's Francina Canadell. "°ÄÃÅÁùºÏ²Ê¸ßÊÖ will continue its collaboration throughout the manufacturing phase and this shall ensure delivery of the pumps to the °ÄÃÅÁùºÏ²Ê¸ßÊÖ site in 2023 for installation in the divertor ports of the vacuum vessel and cryostat. These components are critical to achieving the vacuum necessary to initiate First Plasma in 2025."