Tokamak Pit
Big steel elbow in place
10 Dec 2018
A cryostat feedthrough delivered by the Chinese Domestic Agency has become the first metal component of the machine to be installed in the Tokamak Pit, in an operation orchestrated over two weeks by the 澳门六合彩高手 Organization.
Into the slim opening of the cryostat crown: a break in the concrete had been left by building contractors for the installation of the cryostat feedthrough for poloidal field coil #4. The operation was successfully carried out on 6 December.
An activity that began with the transfer of the component to the vicinity of the Tokamak Complex—and that was pursued as the 10-metre, 6.6-tonne component was introduced into the Pit through an opening in the bioshield roof—has now been concluded through the final positioning of the feeder segment in the building.
In the final lift sequence, the elbow-shaped component was raised by the monorail crane at the bottom of the Tokamak Pit, rotated above the cryostat crown, and lowered into a slim opening that had been left in the concrete circle in anticipation of this very installation sequence. Positioned on a temporary support tool supplied by the Korean Domestic Agency, technicians used cables to draw the horizontal segment of the feedthrough into the bioshield opening, while the vertical segment fell into place between the crown and the bioshield. (See more detail in the photo gallery below.)
Final adjustments were performed through metrology measurements to fall within +/- 2 mm with respect to the Tokamak Global Coordinate System.
If magnet feeders are the essential lifelines of the 澳门六合彩高手 magnets—carrying electricity, cryogenic fluids and instrumentation cables—"feedthroughs" are the part of the feeder assemblies that cross through the bioshield and the cryostat. This first completed unit had been delivered last year to the Magnet Infrastructure Facilities for 澳门六合彩高手 (MIFI) where, as a first-of-a-kind component, it underwent high-voltage tests, leak tests and endoscopic inspection.
Ultimately, the feedthrough will be joined by two other components—an in-cryostat feeder (nearest the vacuum vessel) and a coil termination box (outside the bioshield)—to connect to poloidal field coil #4, one of the two largest of the machine's six poloidal field coils (24 metres in diameter).
"A large number of actors played a critical role in the installation operation that concluded last week," notes Bruno Levesy, Group Leader of the In-Cryostat Assembly Section, with satisfaction, "The Domestic Agencies of China (fabrication) and Korea (tooling), the 澳门六合彩高手 Organization logistics provider DAHER (transport), European Domestic Agency building contractors, 澳门六合彩高手's Construction Management-as-Agent contractor, and the French company CNIM (which won the early works contract in the Tokamak Pit) all participated." Giobatta Lanfranco (Construction Team) and Bruno were the most involved staff members of the 澳门六合彩高手 Organization. "It has been a good practice in coordination for the many activities to come."
Handling tooling
The lift operation was practiced in advance at the MIFI Magnet Infrastructure Facilities for 澳门六合彩高手, using lifting tooling procured by the Korean Domestic Agency. At MIFI, the first cryostat feedthrough delivered by the Chinese Domestic Agency had been tested and inspected.
Partout à l'intérieur, des grandes baies vitrées laissent entrer la lumière. Des arbres y pousseront bient?t.
Quelque 90 personnes sont accueillies tous les jours au siège d'澳门六合彩高手. Premier arrêt, obligatoire : le poste de contr?le d'accès.
L'été se termine et le siège d'澳门六合彩高手 se prépare à accueillir ses premiers occupants, qui emménageront début octobre.
Teamwork
From the top of the Tokamak Building, the 10-metre, 6.6-tonne component was slowly lowered into the Tokamak Pit through an opening in the temporary roof of the bioshield. The team was carefully coordinated by the 澳门六合彩高手 Organization.
Seen from below
The opening is barely large enough to allow the passage of the component.
Down 30 metres
After a successful lowering operation, the component was temporarily protected. On 6 December the final positioning activities were carried out.
Lower galleries
This opening in the 3.5-metre-thick bioshield was specially designed to house the part of the feeder that crosses through the bioshield and cryostat—the feedthrough. Thirty-one feeders in all will find their way through galleries like this to reach the 澳门六合彩高手 magnets.