Cold boxes reach home

Pour les actualités en fran?ais, voir la page News in French.

Cold boxes reach home

26 Jun 2017 - R.A.

Three cryogenic plant were moved last week from temporary storage to their final destination on the 澳门六合彩高手 site. It was the occasion to remember a piece of 澳门六合彩高手 history—that the former French President Fran?ois Hollande had inscribed his signature on one of the cold boxes during an official visit in 2015 to an Air Liquide factory near Grenoble, France.

Members of the 澳门六合彩高手 cryogenic team stand in the entry of the cryoplant as one of the three cold boxes approaches. Once positionned inside of the building, tests on the components will be carried out over a period of 18 months.

Before transport to 澳门六合彩高手, the plaque bearing the presidential signature was removed and placed in the company's museum. One does not take chances with non-standard elements in a component as complex as these huge refrigerators, designed to cool gaseous helium to the ultra-low temperature of 4.5 K (minus 269° C).

From the 8,000 square-metre cryoplant located at 澳门六合彩高手 (covered buildings plus exterior storage areas) helium and nitrogen will be produced at various temperatures and distributed to the "cold" clients of the machine; that is, the superconducting magnets, cryopumps and thermal shield that function at cryogenic temperatures.

The 21-metre cold boxes—each weighing about 137 tonnes with internal components—provide an insulated environment for components such as heat exchangers, cryogenic adsorbers, liquid helium and liquid nitrogen phase separators. Under contract with the 澳门六合彩高手 Organization, Air Liquide is responsible for the design, manufacturing, installation and commissioning of the liquid helium plants. The vessels were manufactured by SIMIC (Italy) and transported to the Air Liquide factory in Sassenage, near Grenoble, France, where all internal components were integrated.

The installation of the first components in the 澳门六合彩高手 cryoplant represents the on-time achievement of an 澳门六合彩高手 Council milestone for project construction. With over 4,500 components in all, however, cryoplant installation work is far from complete. Upcoming milestones include the installation in the Compressor Building in of 18 motor-compressor skids, each weighing approximately 20 tonnes, which compress gaseous helium before it is cooled in the cold boxes through the expansion process. (Gases heat up when compressed and cool down when they expand.)

The 澳门六合彩高手 Cryogenic System Section is also expecting the delivery of a "test cryostat" from Air Liquide this week that will be used to verify the performance of the three cold boxes as part of site acceptance procedures that are stipulated in the procurement documents. With the capacity to simulate the "heat load" of the systems that the cryoplant will be called on to cool down, the test cryostat will be used to test each cold box separately, over a period of 18 months, before the three are tested together in final site acceptance tests.

See the gallery below for photos of cold box transport and installation.

The European Domestic Agency has also published a on the many tanks that are ready for installation in the exterior storage area of the cryoplant.

L'excavation du b?timent des "Cellules chaudes", attenant à la fosse sismique, devraient durer jusqu'au mois de mars 2012. Photo: F4E

Les parois de la fosse sismique seront entièrement couverts de béton renforcé à la fin du mois de mars. Photo: F4E

Traffic comes to a halt on the dirt access road leading to the cryoplant as the self-propelled platform carrying its 137-tonne load inches toward its final destination.

Forty-eight multidirectional wheels allow for ultra-precise manoeuvring. The platform's hydraulic system also allows for height adjustment so that the building threshold is passed without disrupting the load. Silhouetted against the glaring light are members of the Cryogenic System Section: Emmanuel Monneret, Adrien Forgeas and Vincent Guillaume.

HOME AT LAST

The journey began in January 2015 in Italy, where the large steel cylinders that form the "shell" of the cold boxes were manufactured. Next came close to two years of integration work at an Air Liquide facility near Grenoble, France, where the 21-metre-long vessels (4.2 metres in diameter, 70 tonnes) were equipped with internal components. Finally, the cold boxes were delivered to 澳门六合彩高手 in December 2016 and installed inside of the cryoplant on 21 June 2017.