Poloidal field coils
A decisive year ahead
16 Dec 2019
Two poloidal field coils—PF6 and PF5—must take their place in the Tokamak pit before the sectors of the vacuum vessel are lowered into place. The final activity on these magnets—cold testing—is planned next year in the European winding facility at 澳门六合彩高手, where work is also underway on the production of a third ring-shaped coil, PF2.
Tooling stations fill the 257-metre European winding facility from end to end. Poloidal field coil #2 (PF2) is in production, the PF5 winding pack is in its impregnation mould, and two cryostats have been assembled at the far end of the building for the cold testing of PF6 and PF5.
The year that sees the start of 澳门六合彩高手 machine assembly—2020—will also be a turning point for the European effort to procure five of 澳门六合彩高手's six poloidal field coils*. From completing the on-site winding facility in 2012 and the installation of tooling, to the launch of qualification activities, the realization of the first production double pancake, and finally the stacking of the first coil... the road to fabricating some of 澳门六合彩高手's largest and most technical components has been both challenging and rewarding.
"Everything about the production of these first-of-a-kind components has been challenging," says Byung-Su Lim, who leads the 澳门六合彩高手 Poloidal Field and Correction Coil Section and interacts close with the European Domestic Agency team and contractors. "Configuring the tooling and learning to operate it, qualifying every important production step, carrying out the manufacturing with accuracy and within tolerances, documenting every stage, working to deadline—teamwork has been a key element at every step of this process. All parties are looking forward to the important milestones that will be achieved next year."
The four largest poloidal field coils—PF2, PF3, PF4 and PF5—will come off the fabrication line in Europe's winding facility at 澳门六合彩高手 while a fifth, PF6, has been manufactured in China by the Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), under the terms of an agreement signed with the European Domestic Agency.
A mould has been assembled and welded around the first on-site production coil—PF5. After the impregnation process, which will last about three weeks, the coil will be prepared for cold testing at 80 K.
In order of completion:
PF6: The heaviest of the ring coils (although not the largest) was completed in China in September. Because it is the first poloidal field coil to be lowered into the pit, it will also be the first to be cold tested. Cold testing, which will be carried out in the European winding facility on site, will require approximately three months, counting time for the cooldown to 80 K and subsequent warm up and electrical testing at various stages. PF6 is expected at 澳门六合彩高手 early next year.
PF5: This is the first coil to be produced by European contractors in the on-site winding facility. Eight double pancakes were produced for this coil and individually impregnated; now the winding pack (with all pancakes stacked and joined) is nearly ready for impregnation (photo above). During impregnation: the mould is first heated to 90 °C for 96 hours to dry the coil insulation and then cooled to 50 °C; roughly 2,200 litres of resin are injected over a period of 60 hours; the resin "gels" for 10 hours at 110 °C; the resin "cures" for 60 hours at 140 °C. Pre-checks, mould conditioning and impregnation are scheduled to begin in February. Following cleaning, dimensional testing, and electrical testing, PF5 will be next in line for cold testing in a cryostat that has been assembled on site to match its dimensions (?17 m).
PF2: The production of PF2 is well advanced—the six double pancakes required to build the PF2 winding pack have been wound and four have been impregnated. PF2 fabrication is benefitting from lessons learned on PF5 and—as it shares the same diameter—the coil is being manufactured on the same tooling. The projected finish date for PF2 is September 2020.
PF3 and PF4 are much bigger coils (?24 m). With the winding activities completed for PF2, contractors have begun to expand the tooling to these new dimensions; work to adapt other tooling stations will follow. The commissioning of the winding line will begin in April.
Next year, the first-completed coils will be removed from the winding facility and placed on temporary supports inside of the Tokamak pit (PF6 in August; PF5 in November).
*The Russian Domestic Agency is procuring one of the poloidal field coils, PF1, which is installed last in the poloidal field coil assembly sequence.
See a on the fabrication of PF5 and PF2 on the European Domestic Agency website.
The building blocks
Double pancakes are double layers of spiralled superconductor that are stacked and joined to form the final coil winding pack. Thirty must be produced by European contractors for coils #2, 3, 4, and 5. (Pictured, the last double pancake for PF2, the second coil to be produced in Europe's on-site facility.
L'aile ouest du siège d'澳门六合彩高手 a été laissée dans son état brut à la fin des travaux. C'est ici, en 2013, que les travaux commenceront sur une extension de 35 m? qui mettra 350 places de plus à disposition d'澳门六合彩高手 Organization.
Verifying leak tightness
Technicians are performing the final checks on the impregnation mould built around a double pancake for PF2. Four double pancakes have been impregnated, two remain.
Last double pancake for PF2
The last of six double pancakes for poloidal field coil #2 (PF2) is being wrapped with insulating tape ... the final step before transfer of the double pancake to its impregnation station. The first two coils produced in the facility are not identical, although both are 17 metres in diameter. PF5 is built from 11.5 km of niobium-titanium conductor (8 double pancakes) and will weigh 342 tonnes when completed; PF2 is built from 6 km of conductor (6 double pancakes) and will weigh 204 tonnes when completed.
Winding pack impregnation: a three-week operation
The casing assembled around the PF5 winding pack must be absolutely leak tight. Approximately 2,200 litres of resin will be injected over 60 hours, followed by a period of "gelling" and "curing."
PF5: soon to become a "rigid assembly"
A close up of the electrical joints on the side of the first winding pack produced in the European winding facility on site. Technicians are assembling and welding the impregnation casing (called a "mould") around the winding pack now; the three-week operation is scheduled to begin early next year.
Cryogenic chamber ready
The cryogenic chamber for PF6 stands ready for the arrival of the completed coil from China early next year. The red gantry crane will be used to lift the 400-tonne component in and out of the chamber.
Final step: cryogenic testing
At the far end of the 257-metre facility, cryostats have been installed for the cryogenic testing of PF5 (foreground) and PF6 (background). The main purposes of cryogenic testing at 80 K are: 1) to cold leak test the coil auxiliary piping; and 2) to subject the coil's electrical insulation to thermal stress as a test.
Tooling to be reconfigured
The winding tooling used for PF5 and PF2 has now been disassembled. It will be reconfigured for the winding of the last two poloidal field coils to be produced in this facility—PF3 and PF4, which have a diameter of 24 metres.