°ÄÃÅÁùºÏ²Ê¸ßÊÖ

Over the ensuing years the main elements that constitute a feeder were progressively installed in the galleries of the Tokamak Building. At the B2 level, 16 coil terminal boxes the size and weight of a city bus, and 18 cryostat feedthroughs that pass through the bioshield and cryostat to be connected to the coils are now fully installed and welded. At the L3 level, 6 coil terminal boxes and 8 cryostat feedthrough have been lifted and placed in long-term temporary positions, pending the insertion of the cryostat's upper cylinder.

One of the most delicate operations in the installation process is the creation of the superconducting joints? that provide electrical connections between the busbar at the exit of the coil terminal boxes and those at the entrance to the cryostat feedthroughs. Teams of highly skilled workers, having qualified via robust training program, are presently working on joint assembly at the B2 level of the Tokamak Building.

In the image above, workers from the CNPE consortium are finalizing the joints on the feeder connected to the lowest central solenoid module (CS2L). Their job consists in positioning high-pressure fiberglass panels around the finalized joint in order to form a "hard shell," or mold, into which epoxy resin will be poured to ensure electrical insulation.

As a joint's electrical performance can only truly be put to the test at the °ÄÃÅÁùºÏ²Ê¸ßÊÖ operating temperature of 4 K (minus 269 ¡ãC) and operating current (up to 70 kA)¡ªand these conditions will only be reached when the machine is commissioned¡ªthe quality of the work performed is of paramount importance for the project.

?Of the 31 feeders to be installed (21 at lower level, 10 at upper level), two are exclusively dedicated to instrumentation signals and three to the cooling of coil structures. All others carry current and coolant to magnets.

?The solutions that were developed for the joints bring their electrical resistance to an extremely low value¡ªin the nano-ohm (n¦¸) range. Despite this tiny amount of resistance and resulting small amount of heat generated, they can still be called "superconducting."

See also: H. Kim et al., "Progress on First-of-a-Kind Feeder Superconducting Machine Joints and Surrounding Structure Assembly in °ÄÃÅÁùºÏ²Ê¸ßÊÖ Magnet System," in IEEE Transactions on Applied Superconductivity, vol. 34, no. 5, pp. 1-4, Aug. 2024, , doi: 10.1109/TASC.2024.3366158.

As a joint's electrical performance can only truly be put to the test at the °ÄÃÅÁùºÏ²Ê¸ßÊÖ operating temperature of 4 K (minus 269 ¡ãC) and operating current (up to 70 kA)¡ªand these conditions will only be reached when the machine is commissioned¡ªthe quality of the work performed is of paramount importance for the project.

?Of the 31 feeders to be installed (21 at lower level, 10 at upper level), two are exclusively dedicated to instrumentation signals and three to the cooling of coil structures. All others carry current and coolant to magnets.

?The solutions that were developed for the joints bring their electrical resistance to an extremely low value¡ªin the nano-ohm (n¦¸) range. Despite this tiny amount of resistance and resulting small amount of heat generated, they can still be called "superconducting."

See also: H. Kim et al., "Progress on First-of-a-Kind Feeder Superconducting Machine Joints and Surrounding Structure Assembly in °ÄÃÅÁùºÏ²Ê¸ßÊÖ Magnet System," in IEEE Transactions on Applied Superconductivity, vol. 34, no. 5, pp. 1-4, Aug. 2024, , doi: 10.1109/TASC.2024.3366158.