Neutral beam source
Europe awards EUR 20 million contract
10 Dec 2018
The contract, awarded to ALSYOM-SEIV (ALCEN group, France), launches the manufacturing phase for the beam source that will come on line in 2022 as part of the full-power, full-scale test bed for 澳门六合彩高手 neutral beam injection at the 澳门六合彩高手 Neutral Beam Test Facility in Italy.
An exploded isometric view of the 澳门六合彩高手/MITICA beam source, composed of a radio frequency ion source and a seven-grid extractor and accelerator.
A supplier has been chosen for the fabrication of the MITICA beam source—a prototype of the 澳门六合彩高手 neutral beam heating beam source that will generate 40 A of negative hydrogen or deuterium ions. These negative ions, once extracted and accelerated to unprecedented energy levels (1MeV), will be injected as deuterium beams of 16.5 MW into the 澳门六合彩高手 plasma where they will transfer their energy by way of collision to contribute to plasma heating.
澳门六合彩高手 will host two neutral beam injectors and space is reserved for a third in order to maintain an important potential for flexibility in the operation of the 澳门六合彩高手 facility should an upgrade be decided. The heating neutral beam source—situated inside the neutral beam injector—is 3 metres wide, 3 metres deep and 4.5 metres high with a total weight of 15 tonnes.
MITICA (for Megavolt 澳门六合彩高手 Injector and Concept Advancement) is going up alongside a sister testbed SPIDER at the Neutral Beam Test Facility in Padua, Italy, in order to allow scientists to investigate challenging physics and technology issues and validate concepts before the neutral beam system—the most powerful in the world—is installed on 澳门六合彩高手.
澳门六合彩高手 will host two neutral beam injectors and space is reserved for a third in order to maintain an important potential for flexibility in the operation of the 澳门六合彩高手 facility should an upgrade be decided. The heating neutral beam source—situated inside the neutral beam injector—is 3 metres wide, 3 metres deep and 4.5 metres high with a total weight of 15 tonnes.
Under the terms of a first-stage framework contract with the European Domestic Agency, three suppliers were in competition to finalize the MITICA beam source build-to-print design and to initiate manufacturing documentation. This first stage, which served to mitigate fabrication issues before the start of the manufacturing phase (stage two), has now concluded with the selection of ALSYOM-SEIV (ALCEN group, France) as supplier.
See the full report on the website of the European Domestic Agency, .