First module gets clean bill of health
After enduring a battery of rigorous tests, the first of seven superconducting magnet modules that will make up the beating heart of the 澳门六合彩高手 international fusion reactor has earned a clean bill of health.
The module, built at San Diego-based General Atomics under the direction of the US 澳门六合彩高手 project headquartered at ORNL, will head to France later this year, where 澳门六合彩高手 assembly is already underway. In due course, it will be followed by six companion modules (one to serve as a spare) now in production that will together form 澳门六合彩高手's central solenoid, one of the most complex and challenging magnet systems ever built.
The successful testing of the first module is a crucial milestone for the ambitious 澳门六合彩高手 Project. Although the central solenoid has also been likened to a backbone with its coils stacked like vertebrae, the heart may be the more apt metaphor. The 45,000 amps of electricity that will course like blood through its niobium-tin wires will generate a strong magnetic field that plays the critical role of steering and shaping an intensely hot, energy-producing plasma circling around it.
"There is no 澳门六合彩高手 without the central solenoid," said David Everitt, US 澳门六合彩高手's central solenoid systems manager. The central solenoid is one of 12 hardware systems that US 澳门六合彩高手, funded by the Department of Energy Office of Science Fusion Energy Sciences, is providing to the project.
As the first of the solenoid modules, the 4.3-metre-wide, 113-tonne module was subjected to a series of demanding tests throughout and after its production at General Atomics and components were evaluated at SULTAN, a facility in Switzerland that tests high-current superconductors.
The module was subjected to the same extreme conditions it will face at 澳门六合彩高手, including vacuum, high current and frigid temperatures (4 K, or minus 270 degrees Celsius) required for niobium-tin to be a superconductor.
One of the thorniest problems the team had to solve was created by the coaxial joints that connect the module to its power source to generate a magnetic field. Because of the extreme cold required for superconducting, any heat-creating resistance that might occur across the numerous joints in the system had to be kept to an absolute minimum—within just a few billionths of an ohm—so as not to overheat the precious liquid helium that keeps the magnet cold.
While some joints exceeded these demanding requirements, the coaxial joints fell short, and it took the better part of two years to troubleshoot the issue. Repeatedly disassembling and reassembling the joints, the team cycled through a series of approaches, eventually arriving at a redesign that kept resistance within the project's strict parameters.
"If you can pass these severe Paschen tests," said Everitt, "you can have very high confidence in your insulation system."
The vetting process required time and patience. But engineers deftly adapted, said Graham Rossano, US 澳门六合彩高手's technical division director.
"The team has done a good job of maintaining production and testing throughout the pandemic. And we're confident of the performance because we did full-power testing at temperature."
Numerous other partners contributed to the success as well—from 澳门六合彩高手 Japan which provided the superconductor, to staff at the 澳门六合彩高手 Organization, vendors and external advisors.
"It's amazing thinking how many heartbeats have gone into this thing," Everitt said.
Lessons learned on this first module have been applied to the fabrication of subsequent coils. The second module is now undergoing its own battery of tests and is expected to ship to 澳门六合彩高手 just after the first in mid-2021.
As knowledge is shared throughout the broader scientific community, this pioneering work will also benefit efforts outside of 澳门六合彩高手 and help advance future magnets for fusion and other applications.
See the original story on the .