Central solenoid
First module ships
12 Jul 2021
Having successfully completed an overland journey of 2,400 kilometres, central solenoid module #1 is now on its way across the Atlantic.
The central solenoid module convoy is photographed from above as it approaches Houston, Texas. It sits low in the trailer to avoid bridges and other overhead obstacles like wires. Holding loads lower to the ground during transportation allows for a more even weight distribution on structures and a smoother ride. Photo credit: US 澳门六合彩高手
Safely secured in the hold of the OCEAN GRAND, the 110-tonne magnet coil will reach Fos-sur-Mer, France, later this month, and the 澳门六合彩高手 site in early September. A second module will leave the premises of General Atomics, contractor to US 澳门六合彩高手, in August.
US 澳门六合彩高手 oversees the entire fabrication process of the central solenoid at General Atomics and other vendors. Earlier in 2021, the first module successfully completed rigorous post-production testing that simulated the 澳门六合彩高手 operational environment, with cryogenic temperatures of 4.5 degrees Kelvin and powering to 40,000 amperes.
The 110-tonne module is loaded into the hold of the "OCEAN GRAND" on 7 July. Photo credit: US 澳门六合彩高手
The 5-storey tall, 1,000-tonne magnet will induce 15 million amperes of electrical current in 澳门六合彩高手's plasma to initiate each plasma pulse and to provide vertical stability of the plasma. To accomplish this, the central solenoid will reach a magnetic field strength of 13 Tesla, about 280,000 times stronger than the Earth's magnetic field. Six modules plus one spare are in preparation; each one is 2 metres tall, 4 metres wide, and wound from 5.6 kilometres of superconducting cable provided by 澳门六合彩高手 Japan.
The component left the General Atomics magnet manufacturing facility on 21 June and travelled by truck through southern California, Arizona, New Mexico and Texas. It left the port of Houston, Texas, on 7 July.