Cryostat Workshop
Lower cylinder and base take shape
5 Feb 2018
The lower cylinder of the 澳门六合彩高手 cryostat represents only one-third of the whole component's height. Still—it dwarfs the men standing nearby.
Nothing gives a better sense of the size of the 澳门六合彩高手 machine than the ongoing works in the Cryostat Workshop, where the the lower cylinder and base section of the cryostat are being assembled and welded under the responsibility of Indian contractor Larsen & Toubro.
Both tiers of the cryostat lower cylinder are now in place, stacked one on top of the other. The lower tier is already fully welded, while the segments of the upper tier are being readied for welding operations.
At the other end of the football-field-size Cryostat Workshop, the base of the cryostat is progressively taking shape.
The base section—1,250 tonnes—is the single heaviest piece of the 澳门六合彩高手 machine. Its form can be compared to that of a deep soup plate, with a 20-metre-in-diameter base, vertical walls and a broad rim (1.30 metre wide and 30 metres in diameter).
The lower portion of this sub-component (equivalent to the bottom of the soup plate) has been finalized. All non-destructive examination tests on the welds were completed, as well as all dimensional/tolerance tests.
On the pedestal rim (the soup plate's rim) welding is now 50 percent complete. For the moment, the space between the two is empty—in other words, the plate has a bottom and a rim, but nothing connecting the two.
"By fitting what we call the 'main shell' only after the pedestal ring and the bottom of the base section are installed provides more flexibility for adjustments," explains 澳门六合彩高手 cryostat engineer Guillaume Vitupier.
Further explanation on the ongoing operations can be found in the gallery below.
Alone in the arena
Stacked one upon the other, the two tiers of the cryostat's lower cylinder form a spectacular arena. Ten metres high and 30 metres in diameter, it dwarfs the lone Larsen & Toubro worker standing in the middle. Tier two segments are presently being aligned prior to welding operations. Work should be completed on this 490-tonne cryostat section this summer.
More than 200 penetrations, some as large as four metres in width, pierce the 澳门六合彩高手 cryostat. The one pictured here is for the neutral beam injection system, one of the heating systems that will bring the plasma to the required fusion temperature.
The base section of the 澳门六合彩高手 cryostat resembles a deep soup plate. For the moment however, only the base (where two workers are standing) and the rim are in place. The vertical "walls" to connect the two will be inserted at a later stage in order to provide more flexibility for adjustments.
A welding robot on the Tokamak seat
Eyes riveted to their control screen, welders from the German firm MAN Diesel & Turbo, contractor to Larsen & Toubro, closely monitor the quality of the welds as a welding robot progresses along the gap between two pedestal plates. The gap is approximately 20 millimetres wide and 200 millimetres deep and requires dozens of "passes" to be filled.