Cryostat
Lower cylinder revealed
18 Mar 2019
They were all there: those who designed it, those who forged it, those who assembled and welded it, and those who closely monitored the requirements and procedures connected with a "safety important" component. Two years after an array of segments were delivered to 澳门六合彩高手, the cryostat lower cylinder—one of the four sections that form the giant thermos that will enclose the machine — had been fully assembled. With scaffolding removed and just a thin translucent film to protect it, the massive structure was at last revealed, both delicate and mighty.
Operators in the centre provide a sense of scale. The cryostat lower cylindre is more than 10 metres tall and approximately 30 metres in diameter. And it represents only one out of four sections ...
"This is the largest component that will go into the machine assembly pit," said Patrick Petit, 澳门六合彩高手 In-Cryostat Assembly Section leader. "It is also an example of broad and exemplary collaboration."
Like the other sections of the cryostat, the realization of the lower cylinder epitomizes the larger collaborative nature of 澳门六合彩高手: designed by the 澳门六合彩高手 Organization, manufactured and pre-assembled by Larsen & Toubro Ltd in India, it was further assembled and welded by a German company under contract to India on international territory conceded by France.
"The realization of this component was not a single person's job," said Anil Bhardwaj, 澳门六合彩高手 Cryostat Group leader. "It has been quite a serious task for all of us, with a large variety of challenges, particularly regarding fitment and welding quality" added Vikas Dube, a mechanical engineer in his team, "and although there were lots of lessons learned, we will face them again when we commence the assembly and welding of the upper cylinder in the coming months."
Read more about the fabrication of the 澳门六合彩高手 cryostat here.
La onzième réunion du Conseil 澳门六合彩高手, conseil d'administration d'澳门六合彩高手 Organization, se termine le 29 novembre 2012. Les délégués des Membres d'澳门六合彩高手—au nombre d'une centaine—se réunissent pour la première fois dans la Salle du Conseil du tout nouveau siège d'澳门六合彩高手.
Both delicate and mighty
Encased in its transport frame, with scaffolding removed and only a thin translucent film to protect it, the massive structure was at last revealed, both delicate and mighty.
Laser mapping for reverse engineering
The 490-tonne lower cylinder will soon be enveloped in a protective cocoon that will insulate it from external aggressions such as dust and humidity. In the meantime, metrology specialists using 3D laser-scanning techniques are busy mapping selected features where the component will interface with other systems (here, a port for the neutral beam injection system). Based on the precise topography of the "as built" component, the interfaces can be reverse-engineered to fit as precisely as possible.
Meanwhile, on the base section
At the other end of the workshop, a big blue device is at work machining interfaces on the pedestal ring that forms the top of the cryostat base. Below the pedestal, the six vertical shells are now welded to the lower sandwich structure, waiting to be lifted and welded to the pedestal ring. The base section should be finalized in July but, contrary to the lower cylinder, the 1,250-tonne base will remain inside the building to be equipped, under the 澳门六合彩高手 Organization's responsibility, with different ancillary elements (stoppers for the gravity supports, shims, bellows, etc.).
Les "cibles" du divertor sont positionnées à l'intersection des lignes de force du champ magnétique, là où les particules de plasma très énergétiques viennent percuter les composants. Cette cible prototype en tungstène (taille réelle) a été réalisée par Ansaldo Nucleare (Italie) pour l'agence domestique européenne.