New targets at Headquarters
Since early March at 澳门六合彩高手 Headquarters in Cadarache, prototypes being developed for the 澳门六合彩高手 machine have been displayed inside and in front of the building. After the blanket module, three mockups for the 澳门六合彩高手 divertor arrived last week and are now on show in the entrance hall.
The divertor is one of the key features of the 澳门六合彩高手 machine. Its function is to extract heat and helium ash, as well as other impurities from the plasma, acting like a giant vacuum cleaner. It is also the main interface between the hot plasma and the material surfaces. The 澳门六合彩高手 divertor consists of a cassette body made up of 54 remotely removable cassettes, each holding three plasma-facing components: the inner and outer targets and the dome.
In the new exhibit, kindly provided to 澳门六合彩高手 by the Austrian company Plansee, there is a mockup of the inner vertical target, a qualification prototype of the same, plus the dome. The vertical target mockup is one-metre long; the final version will be 1.7 metres. It consists of four parallel high heat flux units, assembled on a steel support structure. The current design foresees two different types of armour: tungsten monoblocks on the upper curved section of the vertical target, and carbon-fibre composite monoblocks on the lower straight section. An alternative design was built that uses tungsten flat tiles on the upper curved section instead of monoblocks. Both designs comprise precipitation-hardened CuCrZr tubes which allow the coolant—in this case water—to pass through the composite just below the hot armour.
The third exhibit is a full-scale mockup of the dome. It consists of six parallel high heat flux units, assembled on a steel support structure. The high heat flux components are designed to have complete tungsten flat tile armour, joined by electron beam welding onto a CuCrZr-heat sink, comprising screwed tungsten heat shields in the lower portion.