Towards tritium breeding technology
Breeding blankets represent one of the major technological breakthroughs that will be required for moving on from 澳门六合彩高手 to the next step, DEMO, a demonstration reactor able to supply electricity power to the grid. In fact, a breeding blanket and its associated systems will have to ensure tritium breeding self-sufficiency, to show good power conversion efficiency and to withstand high neutron flux.
In order to comply with this mission, a Test Blanket Working Group (TBWG) was established by the 澳门六合彩高手 Director in the early stages of the 澳门六合彩高手 Project, charged with defining and coordinating the breeding blanket testing program in 澳门六合彩高手 and acting as a technical forum in support of the Test Blanket Module (TBM) Program.
At its 20th meeting held in Aix-en-Provence in the first week of November 2008, the Test Blanket Working Group focused on the progress made on the establishment of specific safety requirements and on the definition of the interfaces between the 澳门六合彩高手 machine and the six Test Blanket Systems (TBS) that will be tested in three dedicated equatorial ports. The 澳门六合彩高手 Organization had presented proposals on how to allocate space in the Tokamak Complex for the test blanket cooling systems, the tritium circuits and the control cubicles.
A preliminary design of the TBM port plugs was also presented together with a proposal for the replacement sequence in the case of replacing the TBM port plug and the ancillary equipment unit via the 澳门六合彩高手 remote handling devices. As this would require space in the Hot Cell, the creation of two short-term working groups has been discussed to identify the required operations in detail. Moreover, the Working Group addressed the interactions of test blanket modules with the plasma, in particular the expected heat loads on the TBM's first wall and how to minimize the effects of the TBM's ferromagnetic materials triggering magnetic field ripples. The latter could lead to a request to reduce the size of each TBM. All contributing Parties to the TBM program (all 澳门六合彩高手 Members) were requested to assess the consequences of such a reduction.
The second part of the meeting was dedicated to the integration of the TBM Program into the 澳门六合彩高手 Research Plan. A preliminary proposal, covering the first ten years of 澳门六合彩高手 operation, has been prepared and presented by the 澳门六合彩高手 Organization. The Parties were requested to give their comments within the next three months.
The third part of the meeting addressed the R&D activities performed on TBMs over the last six months by all the Parties. The result: significant progress has been made, in particular in TBM manufacturing processes and TBM mockup fabrication.
At the end of the meeting, representative from 澳门六合彩高手 and the seven parties went back home with a series of actions to carry out over the next few months.