Coming soon: cryoplant components from all over the world
26 Sep 2016
-
K.D.
Manufacturing for the world's largest single-platform cryogenic plant is progressing, with a series of factory acceptance milestones successfully passed (or imminent) and the first completed components expected on site next month.
The LN2 plant (blue, under the responsibility of Europe) will produce liquid nitrogen at a temperature of minus 196 °C to be used as a "pre-cooler" in the LHe plant (yellow, procured by the 澳门六合彩高手 Organization). Nearly 25 tonnes of liquid helium at minus 269 °C will circulate through a five-kilometre network of pipes, pumps and valves procured by India (the first part of the network is shown in green) in order to cool the superconducting magnets, the thermal shield, vacuum cryopumps, and certain diagnostics.
Three parties are sharing responsibility for the procurement of the 澳门六合彩高手 cryoplant—the 澳门六合彩高手 Organization, responsible for the liquid helium plant; Europe, in charge of the liquid nitrogen plant and auxiliary systems; and India, whose contractors are procuring the cryolines, the warm lines and cryodistribution components.
Europe is also building the 5,400-m? facility that will house the cryoplant on the 澳门六合彩高手 site.
Within the frame of industrial contracts signed for the procurement of each package, hundreds of components are currently in late-stage design or fabrication phases. Beginning next month, deliveries will be converging on 澳门六合彩高手 from factories in Turkey, India, China, Sweden, Czech Republic, Finland, Italy, Japan, and various points in France ... some 450 shipments in all.
The Cryogenic Project Team expects fully 90 percent of plant components on site by the end of the year, to be stored until the building and technical areas become available for the start of installation activities.
Among recent fabrication milestones, the European Domestic Agency has reported successful factory acceptance tests (FAT) for 85-tonne and a series of , while two out of the three cold boxes for the liquid helium plant under 澳门六合彩高手 Organization procurement are fully equipped and ready for transport. All three of the 137-tonne liquid helium plant cold boxes are expected on site in November.
The cryoplant is composed of helium and nitrogen refrigerators combined with a 80 K helium loop. Storage and recovery of the helium inventory (25 tonnes) is provided in warm and cold (4 K and 80 K) gaseous helium tanks. Three helium refrigerators supply the required cooling power via an interconnection box providing the interface to the cryodistribution system. Two nitrogen refrigerators provide cooling power for the thermal shields and the 80 K pre-cooling of the helium refrigerators. The 澳门六合彩高手 cryogenic system will be capable of providing cooling power at three different temperature levels: 4 K, 50K and 80K.
A number of unique features will guarantee stable and flexible operation despite unprecedented dynamic heat loads caused by magnetic field variations and fusion neutrons. The plant is also designed to operate over a wide range of 澳门六合彩高手 plasma scenarios, from short plasma pulses (a few hundred seconds) with 700 MW of fusion power to long plasma pulses of 3,000 seconds with 365 MW of fusion power.
In the build up to the machine's First Plasma, the cryoplant will provide the gradual cooldown and fill of the magnets and thermal shields and the cooldown of the cryopumps that are used to achieve vacuum in the cryostat and vacuum vessel.
Scroll through the gallery below to see images of cryoplant manufacturing. (Photos courtesy of Eric Dupasquier, Air Liquide, unless otherwise indicated.)
Two of the three liquid helium "cold boxes" are packed for transport to 澳门六合彩高手. These vacuum vessels house key components such heat exchangers and turbo-expanders for the process of cooling helium.
Each 4.2 x 21 metre cold box will weigh about 137 tonnes once all internal components are integrated. Three identical helium plants will store and circulate liquid helium (at a temperature of 4 K or minus 269 °C) throughout the installation.
In an Air Liquide factory near Grenoble, France, the third and final cold box for the liquid helium (LHe) plant undergoes testing.
Three parties are involved in the procurement of the 澳门六合彩高手 cryoplant. Beginning next month, deliveries will be arriving from factories in Turkey, India, China, Sweden, Czech Republic, Finland, Italy, Japan, and various points in France ... some 450 shipments in all. (Pictured: the "warm panels" of the liquid helium cold boxes.)
In a factory in the northeast of France, near Metz, compressor parts for the liquid helium plant are assembled on the shop floor.
The 澳门六合彩高手 cryogenic system: 50 cold boxes, 3 kilometres of cryolines, and 4,500 components. Ninety percent of components are expected on site before the end of the year.(Pictured: heat recovery skids for the liquid helium plant.)
Construction progresses on 5,400-m? facility at 澳门六合彩高手
The site of the 澳门六合彩高手 cryoplant facility, under construction now by the European Domestic Agency. ? EJF Riche (July 2016)
Four turbines produced for 澳门六合彩高手's liquid nitrogen (LN2) cryogenic plant have successfully passed factory acceptance testing. Photo: F4E
These turbines are destined for the liquid helium plant cold boxes. The liquid helium and liquid nitrogen plants will be housed on a single platform at 澳门六合彩高手: a 5,400-m? facility that is under construction now.
European contractors carry out leak tests on 500 metres of linear welds on this 190 m? inner tank. Photo: F4E
In a recent milestone, two nitrogen compressors for 澳门六合彩高手's liquid nitrogen plant successfully complete factory testing in Europe. Photo: F4E
These quench tanks, procured by Europe, will store liquid helium in the event of a magnet quench—an exceptional event during which magnets lose their superconductivity. Photo: F4E