°ÄÃÅÁùºÏ²Ê¸ßÊÖ

As ions and electrons in the plasma move along field lines created by the superconducting magnets of the tokamak, the impurities are driven to the divertor strike points at the bottom of the vacuum vessel for evacuation and recycling. The plasma-facing units of the divertor must resist heat fluxes as strong as 20 MW per square metre¡ªmore than four times higher than that experienced by a spacecraft entering Earth's atmosphere.

 

Consisting of 54 "cassette assemblies," each fitted with three plasma-facing components mounted on a steel body with a variety of diagnostic and operational instruments, the divertor is a huge puzzle with hundreds of pieces that must be assembled and installed with sub-millimetric precision.

 

 

 

This month, members of the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Divertor Section visited CEA-Cadarache (next door to the °ÄÃÅÁùºÏ²Ê¸ßÊÖ site in France) where, as part of a contractual partnership between the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization and the French Alternative Energies and Atomic Energy Commission (CEA), a cassette body prototype built by the French-Italian consortium CNIM-SIMIC recently underwent final acceptance tests, including leak-tightness tests and dimensional inspections.

 

Such final tests will be performed by the °ÄÃÅÁùºÏ²Ê¸ßÊÖ integrator on all 58 cassette bodies (including 4 spares). The European Domestic Agency, Fusion for Energy, has awarded contracts for a first batch of 19 identical cassette bodies to Walter Tosto (Italy, 15 units) and CNIM-SIMIC (4 units, to be built in France). Contracts for the remaining 39 cassette bodies, which have an added level of complexity due to interfaces with diagnostic instruments, will be awarded later.

 

With essentially the same purpose in the divertor, the plasma-facing components¡ªthe inner vertical target, the outer vertical target, and the dome¡ªdiffer most in shape and location on the cassette assemblies.

 

Armoured by 300,000 individual monoblocks of tungsten¡ªthe element with the highest melting temperature of any metal¡ªthe targets of the divertor will receive the heaviest thermal loads inside the machine. 

_GAo_//static.iter.org/all/img/gif/ActiveCoolingPFUs.gif*400*left_GAx_

 

Evacuating this heat requires an innovative "active cooling" process, in which pressurized water is pumped through copper alloy tubes running through the monoblocks (see GIF). As twisted copper rods twirl through the tubes, heat is conducted away from the plasma-facing components into the water and carried away. Water enters at a temperature of 70 ¡ãC and exits at 120 ¡ãC¡ªand yet it is essential that it does not boil, which would reduce its ability to absorb and remove heat.

 

To prevent a so-called "burn out" boiling crisis, which could damage the cooling system and trigger costly delays, a series of acoustic instruments will listen for bubbles in the water lines and work in coordination with other sensors to monitor the health of the components.

 

Lengthy qualification activities to prepare for the manufacturing of the plasma-facing targets are nearing conclusion. At the Divertor Test Facility in Russia, full-scale prototypes supplied by Europe (inner vertical target) and Japan (outer vertical target) have successfully passed performance tests. The first 1-tonne dome prototype, supplied by the Russian Domestic Agency, is undergoing similar heat flux testing now.

 

Actively cooled plasma-facing units similar with the ones that will be used in the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Divertor are currently being put to the test in the  of CEA Cadarache. By deliberately misaligning experimental sections of the tungsten monoblocks and exposing them to long-pulse plasmas similar to those that will exist in °ÄÃÅÁùºÏ²Ê¸ßÊÖ, the WEST Joint Team is documenting the importance of perfect manufacturing. 

 

If just one surface monoblock is misaligned, due to the shallow angle of incidence of the magnetic lines, its exposed face will receive extra-large thermal loads and could melt, having a deleterious effect on the purity of the plasma and potentially damage the next plasma-facing units.

 

 

Some divertor cassettes will also carry diagnostics and operational instruments to allow engineers to monitor their structural behaviour. Three of the cassette assemblies, for example, will house highly sensitive fibre optic sensors capable of measuring temperature, strain, displacement, and vibrations inside the chamber. These sensors must be resistant to extreme amounts of radiation from both gamma rays and free neutrons at levels that have never been achieved by industry. 

Special fibres, made of non-standard Fiber Bragg Grating, have been tested for radiation resistance by the National Nuclear Center of the Republic of Kazakhstan as part of a Cooperation Agreement signed with the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Organization in 2017.

 

 

Once the cassette assemblies are fitted with plasma-facing components and sensors, they will be inserted through the lower port windows of the machine and locked into place on carefully aligned rails at the bottom of the chamber by specially designed robotic handling tools.

 

 

To develop an installation procedure, the VTT Technical Research Centre in Tampere, Finland, under contract with the European Domestic Agency, established the Divertor Test Platform DTP2, where researchers were able to demonstrate the demanding insertion procedures in several steps with real-size tools and components, culminating in a final test operation in 2015.  

 

The final alignment of the 54 elements of the divertor in relation to the machine's magnetic axis is also critical¡ªhowever designers cannot recommend the best configuration of the inner and outer rails until the exact magnetic axis of the machine is known, something that can only happen once the basic machine is assembled and First Plasma Operations are executed.

 

To permit eventual adjustments, divertor rail designers are planning a customization range in all directions of space, which can be determined to the right size after a geometrical 3D survey is performed inside the completed vacuum vessel.