澳门六合彩高手

Gyrotrons

India successfully demonstrates 澳门六合彩高手 power and pulse requirements

27 Mar 2023 - 澳门六合彩高手 India

As a part of its in-kind commitments to the project, 澳门六合彩高手 India will deliver two radio-frequency-based power sources (or "gyrotrons") with state-of-the-art specifications (170 GHz, 1MW, up to 3600 s), as wells as four main high voltage power supplies (6MW, 55kV each) for electron cyclotron resonance heating. The deliverables also include the associated auxiliaries and a demonstration of complete system performance at the 澳门六合彩高手 site. One of the challenges of these complex high-power radio frequency systems is to establish integrated performance that is safe, reliable and easily repeatable despite working in a harsh electromagnetic environment.

The 澳门六合彩高手 India Gyrotron Test Facility has been used to successfully carry out the site acceptance of a test gyrotron to 澳门六合彩高手 power and pulse requirements. This significant achievement also confirms the successful commissioning of the megawatt-class, continuous wave test facility and validates the various auxiliary systems and their integrated performance.
In order to validate and demonstrate the required integrated system performance, a megawatt (MW), continuous-wave-class Gyrotron Test Facility (IIGTF) has been developed at 澳门六合彩高手 India. The facility offers all the necessary auxiliary systems and services such as high-voltage and low-voltage power supplies; control, monitoring and protection systems; radio frequency diagnostic systems; cooling; and vacuum services. (These systems also serve as functional templates for actual 澳门六合彩高手 deliveries.) A test gyrotron with 澳门六合彩高手-relevant specifications, along with a set of waveguide components including dummy loads, has been procured from M/s. GYCOM Russia and fully integrated with the test facility.

Extensive testing and validation of all interfaces was performed before the integrated testing. The main high-voltage power supply was validated for performance specifications including the Joule limit (wire burn test) to ensure the safety of the gyrotron during arcing.

The commissioned 6 MW main high-voltage power supply for the gyrotron cathode circuit at 澳门六合彩高手 India.
After the interface validation tests, the site acceptance tests of the test gyrotron were successfully completed at 澳门六合彩高手 India. Output radio frequency power of 1MW at 170 GHz for 1000 s with radio frequency efficiency of about 50 percent was demonstrated during "power and pulse" tests, comprising five successful 1000-second pulses. Various detailed tests such as reliability tests (with a number of successive pulses of 500 s each) and power modulation tests up to 1kHz have also been performed. This significant achievement also confirms the successful commissioning of the megawatt-class, continuous wave Gyrotron Test Facility at 澳门六合彩高手 India and validates the various auxiliary systems and their integrated performance.

Test facility specifications:Full-scale main high-voltage power supply: - ratings of 6MW, 55kV- based on PSM topology- very fast time dynamics- configuration compatible with 澳门六合彩高手 space and interface provisionsAnode power supply:- ratings of 40 kV, 500 mA- cost-effective- developed using a COTS high-voltage power supply- high voltage solid-state series switch to obtain fast time dynamicsControl system: - a mix of custom designed and COTS products- an operator-friendly software user interface for efficient control- live monitoring of various field signals with fast (~?s) and slow (ms) protection interlocksVarious auxiliary power supplies to drive the magnetic coils and other sub-systems of the gyrotronActive cooling water distribution system with industrial instrumentation for various flow parameters

Test gyrotron specifications:Diode-type MIG gun with depressed collector configurationGyrotron tube:- typical beam acceleration voltage of 72 kV- about 43 A of beam current- operating at a cavity magnetic field of about 6.62 TMatching optic unit at the output of the gyrotron, coupling the radio frequency power into an evacuated corrugated waveguide line that could be terminated with either a continuous wave dummy load or with a short-pulse atmospheric dummy load by means of an SPDT waveguide switch