°ÄÃÅÁùºÏ²Ê¸ßÊÖ

Only centimetres away from °ÄÃÅÁùºÏ²Ê¸ßÊÖ's 150-million-degree-Celsius "fusion furnace," certain components will be operating at temperatures that are at the extreme opposite end of the scale.

 

The magnets surrounding the °ÄÃÅÁùºÏ²Ê¸ßÊÖ Tokamak will be cooled to very low, or cryogenic, temperatures near absolute zero¡ªapproximately minus 269 degrees Celsius (4.2 Kelvin). That's colder than the dark side of the Moon or the surface of Neptune, the furthest planet from our Sun.

 

When °ÄÃÅÁùºÏ²Ê¸ßÊÖ's magnets are cooled to -269 ¡ãC, they become superconducting.

 

Superconductivity is a natural property of certain metals, alloys and ceramics when cooled below a defined "critical temperature."

 

Below the critical temperature¡ªwhich varies for each material¡ªelectrical resistance drops to zero, allowing these materials to carry large amounts of electrical current without losing energy.

 

In magnets operating at "normal" temperatures, electrical current can be visualized as a flow of electrons moving through a microscopic jungle of atoms, defects and other electrons. The electrons inevitably collide with some of these particles, causing the electrons to lose momentum, and creating heat in the process.

 

For large magnets, two negative side effects result: more energy is required to restore the lost energy; and the heat generated by the collisions needs to be extracted from the magnet coils.

 

In °ÄÃÅÁùºÏ²Ê¸ßÊÖ, on the other hand, as the superconducting materials in the magnets are cooled to below their critical temperature, the properties of electrons are changed in such a way that this electrical resistance disappears completely, and they become superconductors.

 

"Typically, when you pour energy into a magnet, resistance steals away part of what you have poured in," explains Paul Libeyre, Central Solenoid and Correction Coil Section Leader. "It's like trying to fill a bucket with water when it has holes. A superconducting magnet can be thought of as a bucket without holes; electrical resistance disappears completely and what you pour in ... you are able to keep."

 

 

By "retaining" all of their energy, the superconducting materials chosen for °ÄÃÅÁùºÏ²Ê¸ßÊÖ's magnet systems will be able to carry higher current and produce stronger magnetic field than conventional counterparts. They'll also consume less power and be cheaper to operate ... making superconducting magnet technology the only option for °ÄÃÅÁùºÏ²Ê¸ßÊÖ's huge magnet systems.

 

 

Advances in superconductivity have made possible an array of energy-intensive applications in the past decades such as magnetic-resonance imaging, magnetically-levitated trains, and particle accelerators.

 

Most of the superconducting magnets used in these applications are made from a niobium-titanium (NbTi) alloy that offers robust performance at low cost. °ÄÃÅÁùºÏ²Ê¸ßÊÖ plans to use NbTi for two of its magnet systems¡ªits poloidal field magnets, and an array of small correction coils.

 

Above a certain "critical magnetic field," however, NbTi no longer operates as a superconductor. For the °ÄÃÅÁùºÏ²Ê¸ßÊÖ magnets that will be required to produce the strongest magnetic field¡ªthe central solenoid and the toroidal field coils¡ªthe costlier but higher-performing niobium-tin (Nb3Sn) alloy will be used.

 

Among superconducting tokamaks, Tore Supra in France was the first to test niobium-titanium in its toroidal field system in 1988. EAST in China, commissioned in 2006, was the first fully superconducting tokamak. More recently, niobium-tin (Nb3Sn) superconducting magnets were integrated in the Korean tokamak KSTAR (2008), and in tokamaks under refurbishment (JT-60SA in Japan) or construction (SST-1 in India).

 

These latest-generation tokamaks will be able to achieve °ÄÃÅÁùºÏ²Ê¸ßÊÖ-similar operational parameters; experiments run on these devices will serve to support the operation of °ÄÃÅÁùºÏ²Ê¸ßÊÖ, and to investigate how to optimize the fusion power plants of the future.