Prepping the first coil pair

Pre-assembly

Prepping the first coil pair

8 Mar 2021

Since their delivery to 澳门六合彩高手, in April and July of last year, toroidal field coils #12 and #13 from Japan have been slowly and steadily gaining weight. As the 320-tonne components are prepped for pre-assembly, close to 10 tonnes of equipment, some of it temporary, are being added to their already considerable mass.

In a vast storage/workshop facility on site, a pair of Japanese toroidal field coils is being prepped for the first pre-assembly operation on the sector sub-assembly tools. The process adds approximately 10 tonnes of equipment, some of it temporary, to their already considerable mass.

"Some of the equipment is added at 澳门六合彩高手 because it is too fragile to be exposed to the long sea journey, or because it depends on the reverse engineering assessment carried out after arrival to match the coil with neighbouring components," explains Sebastien Koczorowski, the responsible officer for the toroidal field coil preparation activities. "Other equipment—like the interface clamps or the inter-coil structures—need to be installed and customized on site."

The largest part of the added weight, however, consists of equipment necessary for the lifting and subsequent installation of the coils on pre-assembly tooling in the Assembly Hall—for example a set of massive lifting lugs required for transport by the overhead cranes, or components that will interface with the giant sector sub-assembly tool.

Standing on the scaffolding or crouching under the coils, several teams are at work. Members of the DYNAMIC SNC consortium (one of two machine assembly contractors) they are busy installing the delicate network of the external cooling circuit (130 metres of thin piping), connecting the low-voltage wires for the diagnostics systems, or match-drilling for various interface elements.

It will take another few months to finalize the equipment work and transfer the coils to the sector sub-assembly tool. Once associated to vacuum vessel sector #6 and corresponding thermal shield panels, they will form the first of the nine pre-assemblies required for the 澳门六合彩高手 Tokamak.

In the vast storage/workshop facility, a second pair of coils will soon undergo a similar preparation process, which will be repeated until all nine pre-assemblies are complete and the machine torus finalized.

The 澳门六合彩高手 Tokamak is an experimental machine whose parameters will be closely monitored by a vast array of diagnostics devices. Sorting and connecting the low-voltage cables that transport data from sensors is a delicate operation that is performed during the assembly prep works.

Each coil is being equipped with approximately 130 metres of piping for the external cooling circuit. Attaching these small-diametre pipes prior to shipping would have exposed them to an unnecessary risk.

Between the time a toroidal field coil is delivered and the moment it is ready to enter the pre-assembly process, several tasks must be performed. Some of the equipment is added at 澳门六合彩高手 because it is too fragile to be exposed to the long sea journey, or because it depends on the reverse engineering procedures to match the coil with neighbouring components.

"Match drilling" is being performed in order to match interfaces between the coils and their neighbouring components. Here, the clamp that attaches to a correction coil is being machine-drilled for expansion bolt positioning.