�������ϲʸ���

Arriving at the French port of Fos-sur-Mer from Monfalcone, Italy, was only the first stage of transport for vacuum vessel sector 5. Next, it had to be transported by barge across the inland sea Étang de Berre (155 km2). The European-made sector successfully made the crossing on 11 October.

This month, �������ϲʸ��� will be launching a new version of its public website. The change was compelled for technical reasons, including the need to ensure reliability for a website that has grown considerably over the past 10 years. The �������ϲʸ��� Organization took advantage of the opportunity to update and modernize the design. Readers will see new branding, faster data retrieval, and a more dynamic interface. The navigation will remain similar to the existing site, for familiarity. Look out for the change on Saturday 19 October.

We look forward to your feedback at �������ϲʸ���Communications@iter.org. 

The JT-60SA experiment has been by Guinness World Records as the world's largest tokamak, as measured in terms of plasma volume.

On 4 September 2024 the device, built and exploited by Japan's National Institutes for Quantum and Radiological Science and Technology (QST) in conjunction with Europe's Fusion for Energy (F4E), achieved a plasma volume of 160 cubic metres, exceeding the previous world record of 100 cubic metres. A certification ceremony is planned on Saturday 19 October at the Naka Institute for Fusion Science and Technology.

JT-60SA has been designed to support the operation of �������ϲʸ��� by following a complementary research and development program, and to investigate how best to optimize the operation of fusion power plants that are built after �������ϲʸ���. Further details of its experimental program are explained in the .

-- Photo: Fusion for Energy

EUROfusion “Bernard Bigot” Researcher Grants (ERG) are awarded annually to promising fusion researchers at the post-doctoral stage of their career. Named after the former �������ϲʸ��� Director-General (2015-2022), they seek to enable the development of innovative ideas and techniques through grants that cover part of the salaries of the selected candidates and part of the cost of their research activities and missions for a duration of up to two years.

Winners have been announced for the 2024 cycle, for research projects selected on the basis of excellence and novelty.

See the full list on the .

On 21 November 2024, the European Fusion Education Network  will organize the FuseNet Student Event. All Bachelor and Master's students interested in fusion are welcome to join online.

During interactive lectures over the course of the day, you will learn about state-of-the-art fusion topics and the role of industry. During the casual social events, you will meet fusion students from all over the world and create a network of future colleagues.

For more information or to sign up see . The registration deadline is 14 November.

Late September, �������ϲʸ��� Director-General Pietro Barabaschi is honoured with the 2024 Chinese Government Friendship Award in a ceremony in Beijing. This is the highest award granted by the People's Republic of China to foreigners who have made "outstanding contributions to the country's economic and social progress." Also pictured is fellow recipient Tony Donné (left), physicist and former head of EUROfusion, and WU Sha from the Hefei Institutes of Physical Science.

New results from the  offer positive news for tokamak reactor designs based on deuterium-tritium fuel, according to the European Consortium for the Development of Fusion Energy, .

Reporting on experiments run in deuterium-tritium (DT) during JET's record-breaking campaign in 2021—and comparing them to control experiments performed in pure deuterium (DD)—EUROfusion researchers found that future fusion power plants using DT fuel may experience fewer energy losses in their burning plasma due to instabilities than previously anticipated.

"Our goal was to study whether our earlier findings on turbulence reduction in tokamak plasmas with high-energy ions could be replicated in DT plasmas, the primary fuel for the international �������ϲʸ��� project and future fusion power plants," explain Jeronimo Garcia (CEA-IRFM, France) and Yevgen Kazakov (LPP-ERM/KMS, Belgium), the leading authors of a * published in Nature Communications.  

What they found in experiments that replicated �������ϲʸ��� conditions as closely as possible was that, with tritium in the mix, core plasma conditions actually improved. They also observed "a new beneficial state" at the edge of the plasma, without unwanted energy bursts. "Our results demonstrate that the addition of heavier tritium ions has a calming effect on the plasma, reducing turbulence," says Garcia.

This is good news for �������ϲʸ��� and future magnetic confinement fusion reactors. Alberto Loarte, head of the �������ϲʸ��� Science Division, had this reaction: "The results in these studies show that there is better-than-expected performance in DT plasmas compared with DD plasmas; in particular, instabilities triggered by fast particles in DT plasmas such as those expected for fast helium produced by fusion in �������ϲʸ��� can reduce energy losses from the plasma and increase fusion performance. The studies show that if instabilities remain at low levels they actually increase performance, whereas we had formerly assumed that they would most likely decrease it. The results also show that in conditions that are relevant to �������ϲʸ���, it might be possible to replace the intermittent burst of plasma energy through edge localized modes (ELMs) through a much more benign continuous outflow more easily handled by the wall in �������ϲʸ���."

See the original story on the EUROfusion website .

*J. Garcia, Y. Kazakov et al., Nature Communications 15, 7846 (2024) 

--Image: D-T plasma in JET pulse #99896, together with the computed zonal poloidal flows. Credits — plasma photo: UKAEA; flow calculation: FAR3D code

Speaking at a round table on the green energy transition at the Forum Aix-Marseille economic conference, head of the �������ϲʸ��� Science & Integration Department Alain Becoulet said the fusion ecosystem was developing rapidly but wouldn’t be ready to meet short-term decarbonization goals.

“This is an important moment for humanity because the technology is coming out of the research laboratory and being demonstrated,” noted Becoulet. “�������ϲʸ��� is part of a flotilla of advances in fusion research, industrial testing, and private-sector investment. This is creating the ecosystem and supply chain that will be needed to roll out this energy source on a planetary scale.”

However, Becoulet warned that even after the first fusion power plant is successfully demonstrated, it will take decades to build the thousands of plants required for a global energy transition. He added that in the meantime, broader use of conventional fission plants or new SMRs (small modular reactors) could reduce carbon emissions.

The conclusions of the day's debates and discussions will be shared at the national Cercle des Etats de la France conference, which helps shape France’s economic policies.

After Wendelstein 7-X generated a record plasma in February 2023 (lasting 8 minutes with an energy output of 1.3 gigajoules), the stellarator at the Max Planck Institute for Plasma Physics (IPP) in Greifswald, Germany, was shut down for a one-year maintenance phase.

W7-X began a new experimental phase on 10 September, after significant improvements and optimizations were made to the device (see the detail ) to improve the availability and reliability of the systems. In addition, the scientific capabilities of all systems were significantly expanded and important new observation instruments were added.

The scientific program ahead should gradually see an increase in performance parameters, specifically higher heating powers. Wendelstein 7-X is the world's largest fusion device of the stellarator type.

See the press release in  or .

(Photo Jan Hosan, 2021)

Through a newly launched web platform—the European Fusion Technology Marketplace—Fusion for Energy (F4E), the European Domestic Agency for �������ϲʸ���, and EUROfusion, a consortium of European fusion laboratories, are inviting companies to discover and benefit from fusion spinoff technologies.

The website offers companies and experts a diverse  of technologies developed by F4E’s industrial partners and EUROfusion laboratories as part of work for international research programmes and projects such as: �������ϲʸ���, Europe's stration fusion power plant, the joint Europe/Japan  tokamak, the International Fusion Materials Irradiation Facility (), and the International Fusion Energy Research Center .

"Our experts work to identify their business potential and to facilitate their commercial use. Our services are offered to all companies looking for new market opportunities. We are here to help entrepreneurs, scientists and business willing to integrate fusion technologies in the development of their products," according to the marketplace website.

See all information .

Fusion for Energy (F4E) has opened a Call of Expressions of Interest for collaboration with private sector fusion initiatives. Its aim is "to support the growth and success of Europe's private sector and foster innovative collaborations that will drive the future of fusion energy."

Interested private sector fusion initiatives must: 1) be established with the purpose of developing a fusion device or technologies specific to fusion (or have a business unit dedicated to this goal); 2) indicate the areas of interest for collaboration which may be fusion-related technical areas, or non-technical (e.g., supply chain, legal, etc.); 3) and have their centre of interest or main operations in an F4E Member State (currently the 27 EU Member States).

If there is a mutual interest to cooperate, an agreement will be signed to allow collaboration in fields to be defined jointly such as, not limited to: exchange of knowledge, information and experience, expertise in fusion technologies, fusion supply chain, corporate governance, scientific analysis etc. No transfer of funds from F4E is foreseen under the terms of the call.

See the related story on the .

See the Call for Interest .

Manufactured by Hyundai Heavy Industries, the fourth and last vacuum vessel sector procured by Korea took to the sea on 24 August. The massive 440-tonne component will travel for approximately one month before reaching the Mediterranean. Due to the situation in the Horn of Africa waters, the ship will take the long way home, rounding the Cape of Good Hope at the southern tip of the African continent and sailing all the way north to the Strait of Gibraltar to enter the Mediterranean.

Pre-registration ends on 10 September 2024 for the 13th �������ϲʸ��� International School, which will be held from 9 to 13 December 2024 in Nagoya hosted by National Institute for Fusion Science (NIFS), Japan. The theme of the 13th School is "Magnetic Fusion Diagnostics and Data Science."

Diagnostics are key to the achievement of �������ϲʸ��� fusion power demonstration goals and they require the application of a wide range of techniques. But diagnostics are not enough to ensure �������ϲʸ���'s success; only through advanced analysis of the data they provide will it be possible to guide the experiments towards their fusion power goals. It is timely to address these multidisciplinary areas in the �������ϲʸ��� school.

To register, and for all information, .

Fred Mills of  construction channel on YouTube returned to the �������ϲʸ��� site this summer to report on �������ϲʸ��� after a  produced in 2022 amassed 4 million views.

In a sleekly produced 30-minute feature he reminds his audience of the potential of nuclear fusion ... and the many challenges. He recounts how the international collaboration got its start in the 1980s, how facility construction began in 2010, and how today, in the context of challenges in assembling the one-million-component machine, the teams are collaborating to solve engineering challenges and deliver solutions.

He calls �������ϲʸ��� "the planet's most monumental build." The scale of the ambition, the extent of the engineering, the attention to detail is honestly mind-blowing," he says. "It’s hard to think that the place where I’m standing could one become the birthplace of a new form of energy. This spot could literally see the start of something that could change the world." 

Views have already topped 450,000. See the video on YouTube .

The Board of Directors of  (FPA) has announced its 2024 Excellence in Fusion Engineering Awards. The awards will be presented at Fusion Power Associates 45th Annual Meeting and Symposium "Fusion Energy: Progress, Challenges and Promise," December 2-3, in Washington, DC.

Cami Collins, of Oak Ridge National Laboratory, is recognized for her pioneering scientific contributions, including first observation of critical gradient-driven energetic particle transport. The Board also notes her exemplary leadership in advancing U.S. community plans, exceptional record of plasma physics outreach, and strong advocacy for advancing women engagement in fusion research.

Annie Kritcher, of Lawrence Livermore National Laboratory, is recognized for her multi-year leadership of the design activity that led to the achievement of fusion ignition on NIF (National Ignition Facility). The Board noted that, using complex multi-dimensional radiation hydrodynamics simulations, her target designs were used over several years for a set of experiments with a range of target specifications and laser pulse shapes leading to the successes on NIF.

FPA Excellence in Fusion Engineering Awards have been given annually since 1987, in memory of MIT Professor David J. Rose, to recognize persons in the relatively early part of their careers who have shown both technical accomplishment and potential to become exceptionally influential leaders in the fusion field. A list of previous recipients can be found at  and click on Awards.

A 440-tonne sector of the �������ϲʸ��� vacuum vessel completed by HD Hyundai Heavy Industries Co., Ltd was transported to the Korean port of Mipo on Friday 23 August. It shipped on 24 August and is expected to reach �������ϲʸ��� next month.

This is the fourth and final vacuum vessel sector expected from Korea. Three other sectors arrived respectively in 2020, 2021, and 2022.

The torus-shaped �������ϲʸ��� vacuum vessel will be formed from nine vacuum vessel sectors. Five sectors are expected from the European Domestic Agency including one, sector #5, later this year.

The  has released its 2024 Global Fusion Industry Report. The report, which surveyed 45 companies, found that the fusion industry has attracted over USD 7.1 billion in investment, with USD 900 million in new funds since last year. Total public funding increased by 57% in the last 12 months to USD 426 million, showing that governments increasingly see public-private partnerships as central to making commercial fusion a reality. It also showed the United States leading commercial fusion, with 25 companies, followed by the United Kingdom, Germany, Japan, and China. Additionally, employment in private fusion firms grew by 34% to over 4,000.

More information is available .

The �������ϲʸ��� Organization has signed an agreement on technical cooperation with TAE Technololgies. 

This private fusion energy company located in California is developing a proprietary compact, linear device called "an advanced beam-driven field-reversed configuration" designed to operate with hydrogen-boron fuel. Two subsidiaries—TAE Power Solutions (for a more efficient and resilient power grid) and TAE Life Sciences (novel cancer drugs)—complement its fusion power activities, which have been underway since the company's founding in 1998.

The purpose of the agreement between TAE and �������ϲʸ��� is "to promote cooperation and exchange in technical fields of mutual interest." "Together, we will work to advance the development of fusion power and a well-trained workforce," said the company in a post on .

-- �������ϲʸ��� Director-General Pietro Barabaschi (second from left) meets (left to right) Chief Technology Officer Artem Smirnov, SVP Fusion Science Sergei Putvinski, CEO Michl Binderbauer, and VP R&D Mike Meekins during a recent visit to TAE Headquarters.

The Board of Directors of (FPA) has announced its 2024 Leadership Awards. The awards will be presented at Fusion Power Associates 45th Annual Meeting and Symposium "Fusion Energy: Progress, Challenges and Promise," December 2-3, in Washington, DC.

Ian Chapman (UKAEA, left) is recognized for the broad range of his technical and management skills, including the completion of the JET scientific mission and the expansion of the UKAEA Culham Laboratory's role in establishing a UK national focus on moving more quickly toward fusion power.

Constantin Haefner (Fraunhofer Institut, right) is recognized for his demonstrated leadership in the areas of state-of-the-art laser and optical technology for inertial fusion, high energy density physics and the generation of secondary sources for a range of applications, and the role he is playing in elevating national attention on fusion energy development.

FPA Leadership Awards have been given annually since 1980 to recognize persons who have shown outstanding leadership qualities in accelerating the development of fusion as a commercial power source. A list of previous recipients can be found at and click on Awards.

On 2 July, the Fusion Industry Association released its 2024 Supply Chain Report. The report—an updated version of last year's—surveys fusion developers and suppliers to get a snapshot of where the supply chain stands as the fusion industry grows. Designed to capture and analyze trends, challenges, and opportunities within the industry, the report "aims to serve as a resource to better understand the scope of supply and demand in fusion energy, and to guide investment and policy strategy to support the realization of commercial fusion power at scale."

More information available .